Three-Layer Chipboard

Send Inquiry
Three-Layer Chipboard
Details
Three-Layer Chipboard is an engineered wood panel manufactured with a multi-density core-surface structure. Fine wood particles on both outer surfaces provide a smooth, defect-free face ideal for direct lamination (melamine paper, veneer, or HPL), while coarser wood chips in the middle layer ensure structural rigidity, impact resistance, and optimal screw-holding capacity.
Category
Plain Particle Board
Share to
Description

Three-Layer Chipboard is an engineered wood panel manufactured with a multi-density core-surface structure. Fine wood particles on both outer surfaces provide a smooth, defect-free face ideal for direct lamination (melamine paper, veneer, or HPL), while coarser wood chips in the middle layer ensure structural rigidity, impact resistance, and optimal screw-holding capacity.

Produced on continuous hot-pressing lines utilizing automated resin-blending systems, this panel delivers consistent thickness, uniform density, and reliable dimensional stability required for automated high-speed furniture production.

 

Key Features

 

Multi-Layer Structure: Fine surface layers prevent telegraphing through thin overlays; coarse core layers maximize internal bond strength and bending resistance.

Machinability: Clean, stable edge profiles during CNC routing, drilling, and edge-banding operations with minimal chipping.

Surface Uniformity: Calibrated sanding ensures precise thickness tolerance and flat surfaces ready for direct melamine impregnation or foil wrapping.

Environmental Compliance: Manufactured with low-emitting synthetic resins meeting global formaldehyde emission standards.

 

Specifications

 

Technical Parameter

Standard Value / Range

Testing Standard

Thickness Range

9 mm – 25 mm

ISO 16987

Density

650 kg/m3 – 720 kg/m3

EN 323

Thickness Tolerance

+/- 0.2 mm

EN 324-1

Formaldehyde Emission

CARB P2 / EPA TSCA Title VI / E0

ASTM E1333 / EN 717-1

Internal Bond Strength

>= 0.45 N/mm2

EN 319

Bending Strength (MOR)

>= 14 N/mm2

EN 310

Standard Panel Sizes

1220 x 2440 mm, 1830 x 2440 mm, 2070 x 2800 mm

-

 

Applications

 

Cabinet & Wardrobe Carcasses: Used as structural box construction material for kitchen cabinets and modular closets.

Office Furniture: Serves as the core substrate for desks, conference tables, and workstation partitions.

Retail Store Fixtures: Applied in commercial shelving, display units, and POS counters.

Lamination Substrate: Direct base board for Melamine Faced Chipboard (MFC), wood veneer, and High-Pressure Laminates (HPL).

 

Customization Options

 

Size Dimensions: Custom length and width cutting available upon container-load orders to minimize cutting waste in automated processing lines.
Density Profiles: Adjustable core density parameters to match specific load-bearing or lightweight requirements.
Moisture Resistance (MR): Melamine-urea-formaldehyde (MUF) resin integration available for high-humidity environments.
Packaging Configurations: Vertical or horizontal steel-strapped palletization with edge protection for secure ocean freight transport.

 

Quality & Manufacturing Control

 

Production relies on industrial-scale multi-opening and continuous hot-pressing lines equipped with automated online thickness gauges and moisture sensors.

 

Raw Material Sorting: Clean industrial softwood and hardwood chips undergo multi-stage magnetic separation and screening to remove impurities and ensure homogeneous board composition.

Resin Application: Mechanical glue-blending systems ensure precise resin-to-wood ratios, controlling thickness swelling and dimensional stability.

Laboratory Testing: On-site quality control laboratories conduct daily batch testing for internal bond strength, moisture content, surface soundness, and formaldehyde release according to EN and ASTM protocols. Test reports are available upon request for each production lot.

Certifications: Factory operations comply with ISO 9001 quality management and CARB/EPA chain-of-custody requirements.

 

FAQ

 

Q: What is the standard formaldehyde emission level?

A: Standard production meets CARB Phase 2 and EPA TSCA Title VI requirements, with E0-grade options available for strict indoor air quality applications. Certified documents are provided with every shipment.

Q: Can this chipboard be used directly for melamine lamination?

A: Yes. Both faces are sanded with fine-grit belts (up to 120-grit), providing a smooth, uniform surface suitable for direct short-cycle press melamine lamination without telegraphing.

Q: Are physical samples available for laboratory testing?

A: Yes. We provide free A4-sized physical samples and full technical data sheets for client evaluation prior to placing trial orders. Courier fees apply.

Q: What is the minimum order quantity (MOQ) for custom thicknesses or sizes?

A: Standard production runs require a minimum of one 40-foot container (FCL) per specification to optimize manufacturing setups and logistics.

Q: How are the panels protected during ocean shipping?

A: Panels are stacked on sturdy bottom runners, wrapped in protective waterproof polyethylene film, secured with vertical and horizontal edge protectors, and fastened with steel bands to prevent transit damage.

 

Inquiry CTA

 

To request physical samples, technical data sheets, test reports, or container-load quotations for your specific project requirements, please contact our technical sales team:


Email: 18605304577@163.com
Required Inquiry Details: Thickness, density, volume (cubic meters or container count), destination port, and target application. 

Hot Tags: three-layer chipboard, China three-layer chipboard manufacturers, suppliers, factory

Send Inquiry